German English

Stehr manhole cover cutter

Bobcat SKFBobcat SKFBobcat SKFBobcat SKFBobcat SKFBobcat SKFBobcat SKFBobcat SKFBobcat SKF

Stehr - manhole cover cutter

The professional tool for use in the Road construction, Ceiling Restoration and rehabilitation of Fixtures.

 
STEHR manhole cover cutter
 
STEHR manhole cover cutter STEHR manhole cover cutter
 
 
So far:

STEHR manhole cover cutter STEHR manhole cover cutter

STEHR manhole cover cutter
Asphalt milling always be a rectangular area returned unprocessed.
 

At the New the shafts are covered with a blind cover. Subsequently, the road is completely built over and compacted. Recently, the (previously measured!) Internals wirder milled free. Advantage: optimal compression in the edge region of the shafts.

In the Ceiling Restoration be milled off before the internals. At least fifteen units per hour can be realized. After that, the cold milling can erode the ceiling without obstacles. Subsequently procedure as when new.

In the renovation of installations is milled off with a single hole in the old manhole frame and created the space required for the desired construction. The size and equipment of the mill bit here depends on the type of renovation:
Installation BEGU - Frame with or without paving surround, fitted Self - Level, Buderus BUDAPLAN® "conical" etc.
 
 
STEHR manhole cover cutter
 
STEHR manhole cover cutter STEHR manhole cover cutter
Side Anbaufräse in shallow, medium and high arrangement available.
 
STEHR manhole cover cutter
Flat or conical shape
 
 
The milling time is only about 2 Minutes per shaft, appropriate hydraulic performance of the carrier provided .. The Life the cutting tools are an average of 100 holes high, the exchange takes place fast and economical.
 
STEHR manhole cover cutter STEHR manhole cover cutter
Special cultivation cutter for a conical bore. After extensive testing in cooperation
with the ICT Gelsenkirchen this system is prescribed by the city of Dusseldorf.
 
STEHR manhole cover cutter STEHR manhole cover cutter
BUDAPLAN cover of conical shape
 
STEHR manhole cover cutter STEHR manhole cover cutter
Long-term tests on 2 years in the cities of Munich, Grafing b. Munich and Suhl
showed that no damage was noted by reduction and the environment.
 
 

Mine elevating equipment: No solution

The only "cosmetic" repairs with manhole lifting devices is problematic because when lifting any connection between manhole frame and road surface breaks off and since the most also in need of rehabilitation asphalt surface is not renewed in the vicinity of the well, but is covered only with a small amount of bitumen: no restoration, but only Cosmetics!
 
 
Further information:
 
STEHR manhole cover cutter STEHR manhole cover cutter
 
Attachment variants
Accessories
Tender specifications (road construction, restoration, ceiling restoration)
 
 
The asphalt - cover layer region around bay fixtures in need of rehabilitation is often also damaged. To fast Restoration was this a new Mill bit developed with the side - milling segments to secure this area in a single operation with abfräst - in a few minutes.
STEHR manhole cover cutter
 
STEHR manhole cover cutter STEHR manhole cover cutter
 
STEHR manhole cover cutter STEHR manhole cover cutter
 

Economic efficiency:

Machining the shafts, valves and hydrants in road construction and in the renovation is decidedly economic and quality than expensive manual work. In addition, the construction process is accelerated. Especially where your actual performance does not get paid in full through aggressive pricing, the machine execution is your chance! Ask around and go with the times! Stehr special machines
 
 
 
Load balancing on manhole conventional system and new StehrProcedure
Road construction
Free milling




STEHR manhole cover cutter
Conical free milling with conical Buderus BUDAPLAN ® manhole frame
Milling of the cone
Manhole rehabilitation
 
 
 



STEHR manhole cover cutter
The application of the Stehr-Kanaldeckelfräse Step by step - with our customers Haenlein:
www.haenlein.de/stehr.html



Stehr Contact

Stehr Baumaschinen GmbH
Am Johannesgarten 5
36318 Schwalmtal Storndorf

Phone: +49 (0) 6630 / 91844-0
Fax: + +49 (0) 6630 / 91844-99
E-mail: info [@] stehr.com